Home / Shop
GNSS/GPS 3G 4G CAN-Bus Cape & BeagleBone® Enhanced (BBE) Industrial
- Description
- Specifications
- Customer Reviews (0)
SanCloud BeagleBone® Enhanced GNNS/GPS 3G 4G CAN-Bus Cape
& BeagleBone® Enhanced Industrial- Product Package
This plug-in cape connects with SanCloud’s BeagleBone® Enhanced Industrial Single Board Computer (SBC) to form an extremely versatile open source development platform or embedded system for all kinds of connected vehicle and remote diagnostics applications. With an industrial operating temperature range of –40°C to 85°C and supplied it a waterproof and flameproof enclosure, it can be used in harsh temperature environments.
Processor: AM335x 1GHz ARM® Cortex-A8
- 1GB DDR3 RAM
- 4GB 8-bit eMMC on-board flash storage
- 3D graphics accelerator
- NEON floating-point accelerator
- 2x PRU 32-bit microcontrollers
- 6 axis MEMS accelerometer/gyro
- Barometer and temperature sensor
Cape Features
- Choice of GNNS receiver modules for GPS, Galileo, GLONASS, BeiDou & QZSS satellite systems via Mini PCIe USB interface
- Single or Dual CAN interface supporting speeds of up to 1Mb per second
- Choice of GPRS, 2G, 3G & 4G Modules via Mini PCIe USB interface enabling greater geographical coverage
- Ignition & Accessory Input
- Onboard Real Time Clock (RTC) with super-capacitor, for low power accurate time keeping
- DEUTSCH 12-pin DTM06-12SA connector
- IP67 Waterproof and Dustproof Enclosure
- UL-94 Rated Flame Resistant Enclosure
- 6 – 60V DC Input Voltage Range
- Supports the Automotive Grade Linux (AGL) Unified Code Base (UCB) as the “Automotive Cape”. Buildroot and Yocto support
Connectivity
- USB PCIe slot for 3G/4G/GPS module
Software Compatibility
- Debian
- Android
- Ubuntu
- Cloud9 IDE on Node.js w/ BoneScript library
- plus much more
Cape Hardware Specification
Battery voltage: 6, 12, 24, 48V (input range 6 - 60V DC)
Power active: 6W peak excluding active GPS antenna
Power standby: <500mW
Real time clock backup supply: Kemet 0.47F supercap
Real time clock backup time: > 60days from full charge
CAN Ports: Single or Dual interfaces supporting speeds of up to 1Mb per second
Inputs: Ignition & Accessory Input
Surge suppression: IEC-61000-4-4
Connector type: DEUTSCH 12-pin DTM06-12SA connector
Size excluding cable harness: 135 x 117 x 37mm
Weight: 240grams
Operating temperature: -25 to +70degC
Enclosure IP rating: IP67 Waterproof and Dustproof Enclosure
Enclosure flame rating: UL-94 Rated Flame Resistant Enclosure
GSM Specification
SIM Type: Nano Size
GNSS Specification
Antenna: passive or active power. Active 3.3V 150mA max
Systems supported: GPS, Galileo, GLONASS, BeiDou & QZSS (depending on solution used)
The cape accommodates the broad range of modules from the Telit LE910 product family - the next generation of Telit wireless connectivity with xE910 form factor. The LE910s were the first and smallest modules in the market incorporating 2G/3G/4G. LE910 is also available with embedded GNSS receivers.